Skip to main content

کω∊∊t √ap∊ک ●∁☯♏

Creating hand crafted functional works of art! "Get a GRIP and vape!"

Home
What's new / Important
About Us
Video Reviews
Grip Gallery
The GRIP Mod
the G²º mod
The Flair mod
Flair X-treme 26650
Other Mods
Nectar of the Gods juices
Atomizers and Accessories
AW batteries and Chargers
Wood Selection
Storage Solutions
Services We Offer
Placing Orders
What are ecigs mods PV's
Contact Us
Site Map
To purchase any of our products please visit our new ecommerce site www.WoodMods.com
 
 
Authorized Dealer For :

 


 AW batteries, the best performing batteries available for mods.


 

AW P18650 -29 $16.95 

18 mm Width

69 mm length
3.7 Nominal Volts (4.2v peak)
2900 mAh

HEAT RESISTANT LiNiCoO2 NNP cells.
Max. Discharge Rate : 5.8AMPS! Enough for many Ecig mods with more total runtime than IMR.

AW protected cells have an UnderVolt and OverVolt cutoff built in. Will also detect and prevent a short circuit. Place on charger to reset the Protection circuit (PCB) the safest LiCo cells that exist. Also incorporates an anti explosion vent.

AW Protected LiCo Cells (black label) All LiCo cells have at least 33% more capacity than equivalent IMR cells. Do NOT discharge at more than double the stated Mah capacity. (2C) Do not Charge at more than the stated mah capacity (1C) :

Flat top, Three triangulated raised dots ensure solid cell to cell connection when used in series. Built withtheseLiNiCoO2 NNP cells. These cells are the only IMR or LiCo cells that can be discharged down to 3.0 volts safely. A new technology cell just released recently.


 

AW IMR 18350$7.75 

Safe chemistry LiMN 3.7V rechargeable battery is now available in 18350 size. These cells can handle high amperage and is safe to use in series / multi-cell applications.
Can be charged with any Li-ion battery charger with 4.2V output.


Specifications:
Nominal Voltage : 3.7V
Capacity : 700mAH
Lowest Discharge Voltage : 2.50V
Standard Charge: CC/CV (max. charging rate 1.5A )
Cycle Life : > 500 cycles
Max. continuous discharge rate : 8C

Caution:

- Do not over-discharge/overcharge
- Do not short circuit (will release tremendous current)
- Do not dispose of in fire.
- Recharge empty batteries ( resting voltage ~3.6V ) as soon as possible. Leaving LiIon batteries in discharged state will incur irreversible damage (capacity / cycle loss )

Attention:
These IMR cells have much lower internal resistance than regular LiIon 3.7V cells and they may end up with a higher ending voltage when charged in certain chargers ( especially older version WF-139 charger ). Please check the voltage of them right out of the charger to see if they are above 4.20V when fully charged with your charger. Overcharging above 4.25V may shorten life/cycles. Above 4.50V may even pop them or making them leak. DO NOT use the charger if it seems to overcharge IMR cells.



 

AW LiFePO4 3.2v$6.25 

AW 3.2 Volt RCR123 Protected Battery - 3.2 volt max output. Charge these batteries with UltraFire or Pila 3 volt / 3.6 volt charger on the 3 (3.2) volt setting only.

These are new generation R123 with safe chemistry that will not vent with flames (explode). The key to this safety feature is that no oxygen will be released from the oxide structure of the cell composition even under abused conditions. No oxygen means no pressure built up and fuel for combustion. Can be used in series in two-cell applications.

Specifications :
Nominal Voltage : 3.2V
Capacity : 500mAH
Lowest Discharge Voltage : 2.0V
Standard Charge : CC 250mA CV 3.6V
Cycle Life : > 500 cycles

Note: Do not discharge below 2V. Cells will be damaged when discharged below 2V.



 

Ultrafire protected 18350 $5.75


Will only fit in our Mini GRIP
(For those who have a problem with overdischarging IMR batteries and ruining them.)





 


AW IMR 14500 $6.75 

Safe chemistry LiMN 3.7V in 14500 size. These cells can handle high amperage and is safe to use in series / multi-cell applications.
Can be charged with any Li-ion battery charger with 4.2V output.


Specifications:
Nominal Voltage : 3.7V
Capacity : 600mAH
Lowest Discharge Voltage : 2.50V
Standard Charge: CC/CV (max. charging rate 1.5A )
Cycle Life : > 500 cycles
Max. continuous discharge rate : 8C

Caution:

- Do not over-discharge/overcharge
- Do not short circuit (will release tremendous current)
- Do not dispose of in fire.
- Recharge empty batteries ( resting voltage ~3.6V ) as soon as possible. Leaving LiIon batteries in discharged state will incur irreversible damage (capacity / cycle loss )

Attention:
These IMR cells have much lower internal resistance than regular LiIon 3.7V cells and they may end up with a higher ending voltage when charged in certain chargers ( especially older version WF-139 charger ). Please check the voltage of them right out of the charger to see if they are above 4.20V when fully charged with your charger. Overcharging above 4.25V may shorten life/cycles. Above 4.50V may even pop them or making them leak. DO NOT use the charger if it seems to overcharge IMR cells.

* Six independent charging channel for 10440/ 14500/ 14650/ 15270/ 16340/ 17670/ 18650/ 18700 battery
* Algorithm charging system (CC/CV)
* 6 spacers


Ultrafire protected 15270 Li-ion  $4.25

For use in our "Mini Sweet Vape"












 

34mm titanium charging spacer$2.99

 

(for charging the 15270 batteries in an 18650 bay)
* 16340 sized spacer

 




 


 

Ultrafire WF-188 charger$15.99 

 

Switchable 3.0/3.2v or 3.6/3.7v batteries

Switchable min charge rate 300mA / max charge reate 650mA

 

Fits most battery sizes:

10430, 10440, 14250,, 14500, 15270, CR2, 16340, RCR123A, 17500, 17650, 17670, 18350, 18490/18500, 18650, 26500, 26650

 

 

 

 

 

 


 


Trustfire TR-003P4 $21.50 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 4 channel charger. Charges most any IMR and Li-ion battery cells including:

 10430, 10440, 14500, 14670, 16340, 17500, 17670, 18350, 18500, 18650

Allows you to charge different sized batteries at once. LED charge indicator for each bay.

Output 4.2v 500mA +-10%

Cut off current 600mA +-10%

 

 

 

 


 

Xtar charging spacers $0.50

 

 


 

Xtar MP2 $13.99

 

 

XTAR 16340/18350/15270 Li-ion Battery Charger.

Comes with USB - mini USB cord, wall wart & 2 spacers

Input: DC 5V
Output: switchable DC 3.0 / 3.7V 2 x 250mA
Applicable battery type: 16340/18350 Li-ion battery 
Battery: not include 
Color:Black
Size(mm): 
NetWeight(g): 32



 




Xtar WP2 II $19.99

 

 

XTAR WP2 II 14500/ 14650/ 17670/ 18500/ 18650/ 18700/ 10440/16340 3.7V Li-ion battery  charger

Comes with 2 spacers, wall plug and 12v lighter socket plug for vehicle.

Charging qualifications and structures
Operation Temperature: 0~40℃
Input AC: 12V DC: 1000mA
500mA CC Current:  500m A±5%
1000 A CC Current: 1000m A±5%
Cut-Off Voltage:  4.2±0.05V
CV Cut-off Current:  <100mA
Standby Current:  <20.0m A
TC Current (Battery Volt 2.0~3.0V):  80±20m A
Auto Recharging Threshold Value Voltage:  3.9±0.15V

USB Discharging qualifications and structures
Operation Temperature: 0~40℃
USB Interface Output Floating Voltage: 5.0V
Output Floating Voltage Ripple: <120 mV
Reactive Current: <10m A
Maximum Output Current: 500mA
Battery Output Cut-off Voltage: 2.80±0.15V






Xtar WP6 II  $34.50

 

6 Channels 10440/14500/14650/16340/17670/18650/18700 XTAR WP6 Battery Charger.

Comes with 6 spacers, wall plug and 12v lighter socket plug for vehicle.

* Six independent charging channel for 10440/ 14500/ 14650/ 15270/ 16340/ 17670/ 18650/ 18700 battery
* Algorithm charging system (CC/CV)
* 6 spacers
* Real-time battery monitoring system
* IC temperature monitoring system
* Input: DC 12V 2A
* Constant charge current:600mA ± 10%
* Constant charge Voltage:4.2V ± 1%
* Adaptor input: 110V~240V AC 50/60Hz
* Adaptor output: DC 12V 2000mA
* Operation temperature: 0℃~40℃
* Size(mm): 120 length x 110 width x 36 height
* Net weight: 163g